Water Tank Tech

العربية Request a quote

Hot Dipped Galvanised

Hot-dip galvanised pressed steel tanks for air-conditioner make-up water, fire fighting and non-food production purposes.

Finish: Hot-dip zinc
Best for: AC make-up water, fire fighting, non-food production
Thickness: 5 mm steel

Quote on WhatsApp Quote by email

Drawing: 4 × 3 panels, 3 tiers high

Specification

Specifications may change without notice and can be customised subject to manufacturer approval and safety standards.
Installation by approved installers only is recommended.
For other liquids, pH levels or higher temperatures, seek the manufacturer's advice.

Specification: Hot Dipped Galvanised
Construction	Rectangular pressed steel sectional tank built from hydraulically pressed, flanged, bolted panels
Materials	Mild steel plates, stays, cleats and pads
Tank panels	4 ft × 4 ft or 1 m × 1 m, hot-dip galvanised
Tank covers	Hydraulically pressed, 1.5 mm, 4 ft × 4 ft or 1 m × 1 m, hot-dip galvanised
Stays and cleats	Mild steel, hot-dip galvanised
Bolts and nuts	Hot-dip galvanised bolts, studs, nuts and washers
Sealant	Non-toxic PVC strips and butyl putty gum: water-tight, weatherproof, insect-proof
Manhole and vent	Per compartment: one 600 mm square manhole and one 100 mm insect-proof vent
Ladders	Galvanised or aluminium, internal and external, on request
Service conditions	Cold liquid, density 1.0, temperature not exceeding 70 °C; water at ambient temperature

Panel thickness by tank height

Tank height	Thickness
4 ft (1220 mm)	5 mm bottom, sides and ends
8 ft (2440 mm)	5 mm bottom, sides and ends
12 ft (3660 mm)	5 mm bottom, sides and ends
16 ft (4880 mm)	6 mm bottom and first tier; 5 mm second, third and top tiers

Other ranges