Water Tank Tech

العربية Request a quote

Galvanised Epoxy Coated

Hot-dip galvanised panels with internal epoxy and an external primer plus alkyd topcoat: a double protective coating system against corrosion.

Finish: Two-pack epoxy, 125 µm
Best for: Water or non-potable liquids needing double protection
Thickness: 5 mm steel

Quote on WhatsApp Quote by email

Drawing: 4 × 3 panels, 3 tiers high

Specification

Specifications may change without notice and can be customised subject to manufacturer approval and safety standards.
Installation by approved installers only is recommended.
For other liquids, pH levels or higher temperatures, seek the manufacturer's advice.

Specification: Galvanised Epoxy Coated
Construction	Rectangular pressed steel sectional tank built from hydraulically pressed, flanged, bolted panels
Materials	Mild steel plates, stays, cleats and pads
Internal coating	One coat of non-toxic two-pack high-build epoxy, DFT approx. 125 microns
External coating	Wash primer with glossy alkyd topcoat, DFT approx. 50 microns
Panels and covers	Panels 5.0 mm, covers 1.5 mm; 1 m × 1 m or 4 ft × 4 ft
Bolts, nuts and washers	Hexagonal, hot-dip galvanised
Sealant	Non-toxic, odourless rubber bitumen strips and bitumen compound
Ladders and indicator	Aluminium ladders and mechanical indirect-reading indicator, on request
Exposed tanks	External polyurethane coating recommended for durability

Panel thickness by tank height

Tank height	Thickness
4 ft (1220 mm)	5 mm bottom, sides and ends
8 ft (2440 mm)	5 mm bottom, sides and ends
12 ft (3660 mm)	5 mm bottom, sides and ends
16 ft (4880 mm)	6 mm bottom and first tier; 5 mm second, third and top tiers

Other ranges